Magnifying and Searching for details on the projected picture

If you need to find the details on the projected picture, magnify the picture. The picture can be enlarged up to 300% than the original picture size with 50% increments. Use the direction arrow keys for navigating the picture.

•Using the remote control

1.Press D. ZOOM + to display the Zoom bar. The center of the picture will be magnified when the key is pressed again. Press the key repeatedly until the picture size is suitable for your need.

2.Use the directional arrow keys (, , , ) on the projector or remote control to navigate the picture.

The picture can only be navigated after the picture is magnified. You can further magnified the picture while searching for details.

3.To reduce size of the picture, press D. ZOOM -. When the key is pressed again, the picture is further reduced until it is restored to the original size.

•Using the OSD menu

1.Press MENU and then press / until the Display menu is highlighted.

2.Press to highlight Digital Zoom.

3.Press to magnify the picture to a desired size.

4.Press to highlight Pan and press ENTER to display the Pan page.

The Pan sub-menu is only available when the picture is magnified.

5.Use the directional arrow keys ( , , , ) on the projector or remote control to navigate the picture.

6.To reduce size of the picture, press EXIT or press MENU to go back to the Display menu,

highlight Digital Zoom, and press repeatedly until it is restored to the original size.

Display

 

Aspect Ratio

 

Fill

 

Digital Screen Shift

0

 

 

 

Keystone

 

 

 

 

Attachable Lens

 

Off

 

Position

 

 

 

3

Overscan Adjustment

0

 

 

Digital Zoom

250%

 

 

4

Pan

 

ENTER

 

PIP

 

 

 

 

Split Screen

 

 

 

 

PC & Component YPbPr Tuning

 

Analog RGB

 

EXIT Back

Pan

EXIT Back

Operation 41