Selecting a picture mode
The projector is preset with several
The picture modes available for different types of signals are listed below.
1.Dynamic mode: Maximizes the brightness of the projected picture. This mode is suitable for environments where
2.Cinema mode: Is suitable for enjoying DVD movies best viewed in a blackened (little light) home cinema or lounge room environment.
3.Blackboard mode: Is designed for educational use. Images are allowed to be projected on a dark background, such as a blackboard instead of a normal screen. It is most suitable for a well lit environment with a dark background for projection.
4.User 1/User 2/User 3 mode: Recalls the settings customized based on the current available picture modes. See "Setting the User 1/User 2/User 3 mode" on page 43 for details.
5.Presentation mode (only for graphic input sources*): Is designed for presentations. The brightness is emphasized in this mode to match PC and notebook coloring.
6.sRGB mode (only for graphic input sources*): Maximizes the purity of RGB colors to provide
7.Standard mode (only for Video input sources**): Is appropriate for viewing colorful movies, video clips from digital cameras or DVs.
*Graphic input sources: Analog RGB,
**Video input source: Component,
To select a picture mode that suits your need:
•Using the remote control
1.Press MODE on the remote control or projector repeatedly until your desired mode is selected.
•Using the OSD menu
1.Press MENU and then press / until the Picture
2.Press to highlight Picture Mode.
3.Press / until your desired mode is selected.
Picture
Picture Mode | Presentation |
Load Settings From |
|
Brightness | +50 |
Contrast | +50 |
Color | +50 |
Tint | 0 |
Sharpness | +50 |
Reset Picture Settings |
|
Rename User Mode |
|
Analog RGB | EXIT Back |
42 Operation