Black Box EncrypTight, ET1000A Adding a Point-to-point Policy, To add a point-to-point policy

Adding Layer 3 IP Policies

Adding a Point-to-point Policy

In a point-to-point network, one network or network set sends and receives data to and from one other network or network set.

Figure 78 Point-to-point network example

In Figure 78, the end-points are Networks A and B. PEP 1 encrypts the traffic sent from Network A to Network B and decrypts traffic received from Network B. PEP 2 encrypts the traffic sent from Network B to Network A and decrypts traffic received from Network A.

When you create a point-to-point policy, you must select one network set for each point.

To add a point-to-point policy:

1 From the Policy view, right-click anywhere in the view and click Add Point-To-Point Policy.

2Double click the new policy name added to the policy list.

3Create the policy in the Point-to-Point Policy editor as described in Table 51. The policy editor is shown in Figure 79.

EncrypTight User Guide 203