
Black Box LR11xx Series Router Configurations Guide
Black Box1> | show firewall policy corp detail | |
Policy with | Priority 1000 is enabled, Direction is inbound | |
Action permit, | Traffic is transit | |
Logging is disable | ||
Source Address | is 10.0.2.0/24, Dest Address is 10.0.1.0/24 | |
Source Port | is | any, Dest Port is any, any |
Schedule is | disabled, | |
is | disabled, | |
Policing is | disabled, Bandwidth is disabled | |
Bytes In 0, | Bytes Out 0 | |
Policy with | Priority 1022 is enabled, Direction is outbound | |
Action permit, | Traffic is self | |
Logging is disable | ||
Source Address | is any, Dest Address is any | |
Source Port | is | any, Dest Port is any, any |
Schedule is | disabled, | |
is | disabled, | |
Bytes In 0, | Bytes Out 0 | |
Policy with | Priority 1023 is enabled, Direction is inbound | |
Action permit, | Traffic is self | |
Logging is disable | ||
Source Address | is any, Dest Address is any | |
Source Port | is | any, Dest Port is any, any |
Schedule is | disabled, | |
is | disabled, | |
Bytes In 0, | Bytes Out 0 | |
Policy with | Priority 1024 is enabled, Direction is outbound | |
Action permit, | Traffic is transit | |
Logging is disable | ||
Source Address | is any, Dest Address is any | |
Source Port | is | any, Dest Port is any, any |
Schedule is | disabled, | |
is | disabled, | |
Policing is | disabled, Bandwidth is disabled |
Bytes In 11258, Bytes Out 5813
Step 9: Repeat steps 1 - 8 with suitable modifications on Black Box2 prior to passing traffic.
Step 10: Test the IPSec tunnel between Black Box1 and Black Box2 by passing traffic from the 10.0.1.0 to the 10.0.2.0 network
32