Black Box Black Box Network Services FaxReceiver, MC200A user manual Telnet Settings

TELNET SETTINGS

Select the TelNet tab.

1)Telnet port – This will enable the end user to set up a port that the company does not block (e.g. port 80 or even port 25). That means that you will be able to telnet into the FaxReceiver from your desk, enable debug, send a fax to the unit (also from your desk), and figure out what is going wrong. If you change the TELNET port number and don't reboot, the new number takes effect on the *second* new telnet session. i.e. open telnet on default port

23. Change to port 1234 and do a quit/save. Open another telnet session, still on port 23, and quit. All following telnet sessions must be on port 1234.

Session Time-out – This option allows you to keep your telnet session active longer if you have a lot of interruptions while configuring the FaxReceiver. If you specify zero as the Telnet session time-out, the session will never time-out.

2)Click the

3)Click the

OK button to exit the FaxDevice Configure for this device.

Close button to exit FaxConfig utility.

Copyright  2006 Ringdale User Manual, 62-15820000 Page 19 of 49