2
/ AUD
Press AUD once:
Alter treble and bass settings using the rocker switch.
Treble +
Treble –
Bass –
Bass +
Press AUD twice:
Alter balance (left/right) and fader (front/rear) settings.
Fader front
Fader rear
Balance left
Balance right
The settings will be indicated in the display. The last setting made will be stored automatically.
Switch off AUD: Press AUD for a third time.
If no changes are made for a period of 8 seconds, the AUD setting will end automatically.
Switching Loudness on/off:
Press AUD for approx. 1 sec. (beep). The current setting will appear briefly in the display (ON/OFF).
For more detailed information refer to “Programming with DSC - LOUD- NESS”.
3SRC (Source)
You can switch between the operating modes for radio, cassette and changer (option) or an auxiliary unit.
You can switch from the telephone menu back to the last operating mode selected.
This assumes that you are not talking on the telephone or trying to place a call.
4TA (Traffic Announcement = priority for traffic messages)
If “TA” appears in the display, you will be able to tune into radio stations which broadcast traffic information only.
Switch priority on/off: press TA.
5TS / BND
Switch between the memory levels/ wavebands FM, TS (Travelstore), MW and LW.
Additional Travelstore function Store the nine radio stations with the strongest reception signals using Trav- elstore: Press BND until you hear a beep or until “TRAVELSTORE” ap- pears in the display.
6
Dolby B NR*
Cassettes recorded with Dolby B NR will be played back in the best quality possible if “DOLBY” appears in the second line.
*Noise reduction system manufactured under li- cence by Dolby Laboratories. The word Dolby and the
7
Eject cassette
Press the button until the cassette ejects.
Track switch
Press the button briefly to switch cas- sette playback to the other track (side) of the tape.
74
