Programming with DSC Telephone
Thanks to DSC (Direct Software Control), it is possible to adapt several of the Radio- phone settings and functions to your own personal needs and to store these altera- tions.
The Radiophone has been set at the facto- ry.
In the following you will find an overview of the default settings, so that you can reset the unit to these basic settings if necessary.
If you wish to alter the programming:
•First select the operating mode, e.g. telephone mode, if you would like to alter the volume for
Access the DSC menu
•by pressing DSC/OK briefly.
Select:
Use the rocker switch 
/
to select the menu item you wish to alter and press OK to confirm your selection.
Alter:
Press << / >> to alter the setting shown in the display and confirm your change by pressing OK.
Cancel:
•Press CL, the altered setting will not be stored.
Store/confirm:
•Press OK.
