Selecting the language for the display
At the factory the texts for the display are set to English.
You can display the texts in other languag- es if you wish.
•Press DSC/OK.
•Press 
/
until “LANGUAGE” appears in the display.
•Press DSC/OK and << / >> to select the language.
•Press DSC/OK and CL one after the other.
Removing the KeyCard/SIM card
Never forcibly pull out the card! You may destroy it.
•First push the card in gently towards the unit.
The KeyCard/SIM card will eject slightly so that you can remove it.
•Remove the card.
When you remove the card for the first time, “LEARN CARD” will appear in the display. Now you can train additional cards (refer to “Train SIM cards”).
After this process has ended, the Radio- phone will switch off when the card has been removed.
Train KeyCard/SIM cards
In the initial programming process you can easily train the second KeyCard and up to 30 SIM cards.
In order to do this the Radiophone must be switched on and the original KeyCard insert- ed.
•Remove the original KeyCard and in- sert the first SIM card.
“NAME?“ will appear in the display.
If you like, you can enter a name of up to 8 characters. Please refer to “How to enter a name/text”.
If you would like to skip this function or after you have entered the name:
•Press OK.
The first SIM card has been programmed. “TERMINATE? PRESS OK” will appear in the display. Now you can programme addi- tional cards.
To finish the programming process:
•Press OK.
The SIM card trained first assumes the ad- ditional function of master SIM card. Other SIM cards can only be trained using either the master SIM card or the KeyCard.
There are two basic ways in which you can train other SIM cards:
a)Training or deleting the KeyCard/ SIM card with DSC
DSC – LEARN CARD
One KeyCard or up to 30 SIM cards can be trained or replaced as addition- al cards.
•Insert the first KeyCard (included with the Radiophone) into the unit and switch the unit on.
•Press DSC/OK and press 
/
to select “LEARN CARD”.
•Press DSC/OK briefly.
“CHANGE CARD” will appear in the display.
•Remove the first KeyCard and in- sert the new card (KeyCard or SIM card).
After insertion of a SIM card only: The display shows “NAME?”.
If you wish, you can now enter a name of up to 8 characters.
If necessary, refer to the section on “How to enter a name/text”.
•Press DSC/OK.
•Enter the PIN code and press DSC/ OK.
After “CODE OK”, the display will show, for example, “SIM CARD 23 AC-
RadioDEUTSCH
ENGLISHTelefon
TelephoneRadio
71
