Using speed-dialling . . .
You can recall stored telephone numbers with the corresponding name or the number of the entry.
The numbers which can be recalled in the telephone’s memory bank range from 1 to 25, on the SIM card from 101 to a maximum 225.
It is possible to use
. . . directly from the memory bank:
•Press the corresponding button (1 to 9) for approx. 2 sec. until you hear a beep.
The call will be placed automatically.
. . . directly from the SIM card memory bank:
•Press * and the corresponding button (1 to 9) one after the other for approx. 2 sec. until you hear a beep.
The call will be placed automatically.
. . . from the telephone book
•Press ME.
•Use 
/
to select “Find entry by name” or “Find entry by position”.
•Confirm your selection by pressing OK.
If “Enter name” appears in the display
•use the selection buttons to enter up to the first three letters in the name.
If “Enter position” appears in the display
•use the selection buttons to enter the position number of the entry.
•Confirm your entry by pressing OK.
If you know the position number of the entry you can enter it immediately after pressing ME and confirm your selection by pressing
OK.
The desired telephone number will appear in the display.
If you want a different number to the one shown in the display, you can press 
/
to scroll through the entries in the telephone book.
To start dialling/end call:
•Press 
.
Redial function
Automatic
If the “Automatic redial” menu item in the setup menu is switched to “ON”, the number will be redialled automatically.
Refer to “Programming with DSC – Setup menu – Automatic redial”.
You can cancel the automatic redial by pressing the telephone key.
Manual
•Press 
.
The last telephone number entered will ap- pear in the display.
To start dialling:
•Press 
.
The display will change in colour to indicate that the telephone has begun to dial the number or that an incoming call has been detected.
100
