Operating the telephone
General information
Using the Radiophone, you can make the same telephone calls as you can with a cel- lular phone.
Important: You must be located in an area serviced by the GSM radio network and have the access privileges provided by a valid SIM card. This SIM card must be inserted into the unit (refer to the section on “KeyCards and SIM cards” if necessary).
Emergency calls
The number to dial to place an emergency call in the GSM network anywhere in the world is 112.
You can place an emergency call by dial- ling this number even without inserting a SIM or KeyCard.
Please read the information in the section on “Using the telephone – GSM emergency calls”.
PIN code
(Personal Identification Number)
Normally, the SIM card will not operate the telephone until a personal identification number (PIN code) has been entered. This PIN code is included with the SIM card when you purchase it.
You can alter or even deactivate your PIN code. Refer to “Programming with DSC – PIN CODE”.
Inserting the SIM card/ entering your PIN code
•Switch the unit on.
With the card tongue protruding, insert the trained SIM card into the slot with the contact surface facing up.
“ENTER PIN” will appear in the display.
•Enter the PIN code using the number keys, starting with the first digit.
•Press OK or #.
If the PIN code has been entered correctly, “CODE OK” will appear in the display fol- lowed by the menu which was used last.
If an incorrect PIN code has been entered, “WRONG
If the PIN code is entered incorrectly three times in succession, it is necessary to use the PUK code (Personal Unblock code) to reactivate the card.
Reactivating the SIM card
The PUK code must be used to reactivate the SIM card.
The display shows “ENTER PUK”.
•Enter your code and press OK to con- firm.
•Enter a new PIN code.
Important!
Make sure you make a note of the new PIN code!
•Confirm your entry by pressing OK and repeat the entry.
94
