Ringing tone volume
Press << / >> to adjust the volume of the ringing tone from between 0 and 9. 0 = off.
If the automatic answer function is switched on, the volume cannot be set to “0”.
Hands-free volume
Automatic answer
The telephone will automatically answer in- coming calls if you press << / >> to select “On” for this menu item.
The call will be set to
In this case, do not set the ringing tone vol- ume to “0”.
Automatic redial
Operating mode
If this menu item is selected, you will be re- quired to enter the access code after press- ing OK.
Then select the operating mode by press- ing << / >>:
Standard | – | all operating modes |
Radio only | – no telephone, all other | |
|
| operating modes |
Phone only | – | telephone mode only |
Press << / >> to adjust the volume of the incoming call from 0 to 63 over the car speakers.
Handset volume
This menu item will not appear unless a Blaupunkt handset has been connected to the system.
Press << / >> to adjust the volume of the handset to one of three levels (low, medi- um, high), remove the handset from the cra- dle first.
If the busy signal is received, an outgoing call will be redialled automatically if you press << / >> to select “On” for this menu item.
You can stop the automatic redial by press- ing the telephone button.
Off – redial is switched off
On – redial is switched on.
The number of times the telephone will at- tempt to redial depends on the network used.
Extended menu
Use this function to remove the following menu items from the display in the setup menu by pressing << / >>. These items are seldom used.
This makes the setup menu more clear.
Off – menu items removed from display
On – all of the menu items are available.
110
