A

X 4

X 4

USE APPROPRIATE

FIXINGS FOR

WEIGHT AND

WALL TYPE

INSTALLATION

B

 

189mm

COMMISSIONING

 

2

19

WALL MOUNTING TEMPLATE

FLUE OPENING

CAUTION: Ensure there are no pipes, electric cables, damp proof courses or other hazards before drilling.

SAFETY:

All relevant safety precautions must be undertaken. Protective clothing, footwear, gloves and safety goggles must be worn as appropriate.

FIXING THE MOUNTING FRAME:

The boiler template shows the relative positions of the flue and the top and bottom fixing of the mounting frame.

Fix the template to the wall in the desired position (A).

Drill 4 holes for the wall mounting frame through the template (2).

NOTE: The template has been sized to allow for minimum clearances of 5mm sides, 200mm base and 30mm above a Ø100mm flue elbow.

REAR FLUE OUTLET

The drawing (B) opposite shows the boiler template with the flue centre lines of both the 100mm and 125mm flue systems.

Mark centreline of flue to be used (1); the external diameter of the hole can also be marked if required.

If a Ø100mm diameter flue is to be used, a125mm diameter hole is required. However, if using the weather sealing collar by pushing it through from inside the property, then a 150mm diameter hole is required to accommodate this.

The terminal section of the 100mm flue has an inbuilt 3° angle.

If extensions are to be added then the complete flue must rise at an angle of 3°.

The 125mm Ø flue system will require the flue to rise at an angle of 3°.

Drill hole using a core drill or similar.

SIDE OUTLET:

Mark from the centre line of the wall template to the wall which the flue will pass through (3). Allow for a rise of 52mm per metre length of flue, to give a 3° angle.

Clear any debris from the site.

A pre-filling kit 7 716 192 282 is available for installations where the boiler will not be fitted immediately to the heating system. This allows the heating system and mains water connec- tions to be filled and checked prior to boiler installation.

This kit can be used in conjunction with the optional filling loop 7 716 192 281(not sup- plied with the boiler).

WALL MOUNTING PLATE FLUE OPENING

INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR 24 i junior/28 i junior 8 716 107 336b (11/05)

Page 20
Image 20
Bosch Appliances 28i junior, 24i junior manual Wall Mounting Template Flue Opening, Wall Mounting Plate Flue Opening

28i junior, 24i junior specifications

Bosch Appliances has long been synonymous with quality and innovation in the kitchen. Among its notable offerings, the Bosch 24i Junior stands out as a compact yet powerful dishwasher that caters to modern household needs. This appliance is designed to provide efficient cleaning while conserving valuable space in smaller kitchens.

One of the key features of the Bosch 24i Junior is its compact size, measuring 24 inches in width. This makes it an optimal choice for apartments, smaller homes, or kitchens with limited space. Despite its size, it does not compromise on capacity, allowing users to load up to 12 place settings, making it suitable for families or frequent entertainers.

The Bosch 24i Junior incorporates advanced cleaning technologies that set it apart from traditional dishwashers. One of these technologies is the PrecisionWash system, which uses intelligent sensors to monitor the cleanliness of dishes throughout the wash cycle. This ensures that each item receives the optimal amount of water and detergent, resulting in sparkling clean dishes every time.

Energy efficiency is another hallmark of the Bosch 24i Junior. It operates on a low water consumption model, using only 2.9 gallons of water per cycle, which is significantly lower than many competitors. This not only helps lower utility bills but is also a step towards more sustainable living. The Energy Star certification further emphasizes its commitment to reducing energy usage without sacrificing performance.

Bosch has also integrated sound-dampening technology in the 24i Junior, ensuring that it operates quietly at just 50 dBA. This low noise level means that the dishwasher can run at any time of day or night without disturbing household activities.

User convenience is enhanced through features such as the ExtraScrub option, which provides a more powerful wash for heavily soiled items. The adjustable racks offer flexibility for loading larger pots and pans, while the foldable tines accommodate a range of dishware sizes.

In summary, the Bosch 24i Junior is a versatile and efficient dishwasher that is ideal for those with limited space. Its thoughtful design and innovative technologies make it a standout choice for anyone seeking reliable dish cleaning solutions without compromising on performance or efficiency. This model exemplifies Bosch's dedication to delivering cutting-edge appliances that fit seamlessly into modern lifestyles.