Thermador® ExtraLow (XLO) Burners (SGSX Models only)
The center and left front burners are enhanced with the ExtraLow (XLO®) feature. When the control knob is set within the XLO® zone, the flame cycles OFF and ON automatically for varying seconds every minute. This cycling is normal and allows you to reduce the heat even further than the low setting to cook delicate foods. For example, this very low setting is suitable to simmer, poach, melt or hold cooked food without scorching or burning.
How They Work
•The burner flame will cycle ON and OFF during each minute when the setting is at any position between LO (past detent) and XLO.
•The length of time the flame is ON and OFF depends on the knob setting.
•With a setting just below LO, the flame will be ON approximately 53 seconds and OFF 7 seconds of each minute.
•With a setting at the XLO position, the flame is ON approximately 7 seconds and OFF 53 seconds of each minute.
•The knob can be set to any position between LO and XLO.
WARNING:
Do not clean or touch any of the burners when one or both ExtraLow burners are in use. When the ExtraLow burner automatically reignites, the igniter at the burner will spark.
Burner “ON” Lights
For SGS models:
An “On” light corresponds with the knob for each burner. When illuminated, it indicates that the corresponding burner is in use.
For SGSX models:
A light ring around each knob will illuminate to indicate that the corresponding burner is in use.
English 8
Burner Grates
Grates must be properly positioned before cooking.
30” 4 Burner
30” 5 Burner
36” 5 Burner
Figure 6: Burner Grates
WARNING:
To prevent
For replacement rubber feet: Part # 416438, contact your dealer or call the service number listed inside the cover.
