Bosch Appliances SGSX manual Control Knobs, Standard Knobs, ExtraLow XLO Knobs

CAUTION:

To avoid possible injury or damage to the appliance, ensure grates are installed exactly per installation instructions and not backwards or upside down.

Four-burner models: When placing center grate, make sure the horizontal bar aligns with the horizontal, center bar of the left and right grates. See figure, “Four-Burner Center Grate Placement” below.

Standard Knobs

SGS models, which do not feature ExtraLow® operations, have only standard metal burner controls and rubber grommets.

Align Horizontal

Bars

Figure 7: Four-Burner Center Grate Placement

Five-burner models: When placing center grate, make sure the long center prong is located at the back of the cooktop. See figure, “Five-Burner, Center Grate Placement” below.

Long

Center

Prong

Figure 9: Standard Burner Control Knob

ExtraLow® (XLO) Knobs

SGSX models have standard metal burner controls and rubber grommets as well as two ExtraLow® burner controls on the left front and center. See “ExtraLow Burner Control Knob” below.

Figure 8: Five-Burner, Center Grate Placement

Control Knobs

Figure 10: ExtraLow Burner Control Knob

The cooktop has one control knob for each burner. Push down and turn to the left to light and set the desired heat setting.

CAUTION:

Failure to operate knobs properly may result in personal injury and damage to the appliance.

The standard burner controls have an infinite number of heat settings. At the LO position of the ExtraLow knobs, a detent or notch may be felt.

To operate: Select the appropriate control knob, push down and turn counterclockwise to the desired flame size. Turn OFF by turning the control knob clockwise to OFF.

English 9