Bosch Appliances SHV99A SHX33A, SHU53E Ilus /Ilus /Ilus, Door Panel Installation, Panel Dimension

25”	1/4” max.
(636 mm)	(6 mm)

23-1/16”

(586 mm)

Figure 15/Ilus. 15

Figure 16/Ilus. 16

Figure 17/Ilus. 17

E n g l i s h

DOOR PANEL INSTALLATION

SHU Models - Accessory Panel Installation

If you have an SHU model and have ordered an accessory panel kit, install the panel prior to sliding the dish- washer into place. The panel dimen- sions are shown in Figure 15.

SHI Models - Panel Installation SHI models come with additional mounting hardware and a template sheet with installation instructions. The stainless steel models of the SHI series also come with two extension pieces. The extension pieces are used to match the control panel height (Figure 16, “B” dimension) to the horizontal drawer line of the cabinets, and must be installed as shown in on the template sheet. The standard piece is used for drawer heights up to 6” (152mm); the long piece is used for drawer heights greater than 6” (152mm) but 6-7/16” (164mm) or less. If your drawers are taller than 6-7/16”, you can either slide the extension piece in as far as it will go, or remove it and fit the door panel directly below the control panel.

SHI/SHV Models - Panel Installation SHV models come with additional mounting hardware and a template sheet that will show you how to mount the panel. One side of the template shows how to mount a one piece panel; the other side shows how to mount a two piece panel. Decide which type of installation you want before proceeding with the installation.

Fig. 17	Panel Dimension
Dimension
D (SHI)	20 11/16” - 25”
	(526mm - 635mm)
E	27 3/16” - 30 5/16”
(SHI & SHV)	(690mm - 770mm)
F	23 3/16” - 23 3/8”
(SHI & SHV)	(589mm - 594mm)

18 Door Panel Installation Installation Panneau de Porte Instalación - Panel de la Puerta