| Figure 22 | Figure 23 | |||||
| Ilus. 22 | Ilus. 23 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 24 | Figure 25 |
Ilus. 24 | Ilus. 25 |
E n g l i s h
DRAIN HOSE CONNECTION
The dishwasher drain hose may be connected to the drain plumbing in one of four ways:
1)Directly to the undersink dishwasher drain connection, as shown in Figure 22.
2)Directly to a disposer dishwasher drain connection, as shown in Figure 23.
3)To the undersink dishwasher drain connection through an air gap, as shown in Figure 24.
4)To a disposer dishwasher drain connection through an air gap, as shown on Figure 25.
Information on installing air gaps and disposers can be found in the Plumb- ing Preparation section of this manual.
NOTE: If the dishwasher drain hose is to be connected to a disposer dish- washer drain connection, remove the plug from the disposer’s dishwasher drain connection.
Use the supplied Rubber Connection Hose and Drain Hose Clamps (letter G in the Materials Supplied section of this manual) to connect the dishwasher drain hose to the plumbing drain connection. Use the spring clamp to secure the Rubber Connection Hose to the dishwasher drain hose. Use the screw clamp to secure the Rubber Connection Hose to the plumbing drain connection.
If the dishwasher drain hose is con- nected directly to either an undersink dishwasher drain connection, as shown in Figure 22, or to a disposer dishwasher drain connection, as shown in Figure 23, form a curve in the dishwasher drain hose and secure a portion of the curve at least 20” (508mm) above the cabinet floor.
22Drain Hose Connection Connexion du Tuyau Vindange Conexión - Manguera de Desagüe
