BM 2610021316 10-11 E:BM 2610021316 10-11 E.qxp 10/17/11 11:02 AM Page 8

26

25

10

 

27

2

9

36

1

33

8

11

12

21

FIG. 1

6

7

 

28

 

29

24

12

 

14

15

13 16

20 17

19 18

22

13.Kerf Insert – Kerf inserts can be adjusted to dif- ferent blade widths to minimize workpiece tear out.

14.Miter Detent Override – Allows detent action to be locked out allowing for adjustments to any miter angle.

15.Miter lock Knob – The miter lock knob locks the miter saw table at any desired miter angle.

16.Miter Detent lever – The lever releases the table from the detent.

17.Miter Scale/Miter pointer – The pointer rotates with the table and blade. It points to the miter scale to indicate the angle setting before a cut is made.

18.Miter Detents plate – There are ten (10) miter detent slots for fast and accurate miter cuts of com- mon angles. The position of the plate can be ad- justed to set the accuracy of its detent locations.

19.Miter Detent plate Screws – Four screws ac- cessible through holes in the miter scale. The screws are loosened when adjusting detent plate position.

20.Table – Sits in base, provides workpiece sup- port, rotates for desired miter cuts and rotates the head assembly.

21.Sliding Base Extensions – Provides working surface to support workpiece, expands to support longer materials.

22.Base Extension Clamping levers – Lock the base extensions at the desired positions.

23.Tool Mounting pads – The four corners of the saw provide areas to clamp, bolt or nail/screw the saw to a flat work surface.

24.Dust Chute – Directs sawdust up and through elbow to the dust bag.

-8-

Page 8
Image 8
Bosch Power Tools CM12 manual