BM 2610021316
3 | FIG. 2 |
35
5
4
30
31
32
34
23
25.Dust Elbow – Connects the dust chute to the dust bag. Can be rotated to direct dust.
26.Dust Bag – Captures chips and dust. Has zipper at the bottom. Bag can be uncoupled from elbow or chute for emptying.
27.lower Guard Actuation link
28.Material Clamp – Used to hold the workpiece to the table and base; insert into clamp post location (item 29).
29.Clamp post location – Insert material clamp post into hole prior to locking.
30.Brush Caps – Keeps motor brushes in position and provides easy access for inspecting and replac- ing brushes.
31.Bevel lock lever – Locks and unlocks the head assembly at a desired bevel angle.
32.Bevel Scale and pointers – Allows user to eas- ily read bevel angles. Pointer indicates current angle.
33.left Bevel Stops – Adjust for 47°, 45°, and 33.9° bevel stops (crown molding setting).
34.
35.Arbor lock – Press arbor lock button to keep blade from rotating when loosening or tightening arbor bolt during blade removal or installation.
36.Head Assembly lock pin – Used to lock the head assembly in lower position for transporting.
