English | Español | Français |
|
|
|
CONTROLLING EXTERNAL SOURCES
Figure 7
Changing the TV Power
Video |
|
TV Power: |
|
Automatic | |
TV Power Status: | TV Detected |
TV Aspect Ratio: | - - |
Widescreen DVDs: | - - |
Video Connector: | Component |
Video Black Level: | Normal |
The Media Center can turn your TV on automatically whenever you select a video source.
navigate 
select
8.Notice the TV Power Status:
•TV Detected means the installed TV sensor is working.
•TV Not Detected means the TV sensor (if installed) is not connected or not positioned properly.
•Press System or Exit to leave the System menu.
For cable/satellite control
The cable box or satellite receiver that is connected your LIFESTYLE® system is the one you should select. So when you press the CBL• SAT source button and the On/Off button below it, you are operating that device.
If you own both a cable box and satellite receiver, use the AUX option to designate the sec- ond device brand and code.
Note: For general guidelines on using the LIFESTYLE® System menu, refer to “Using System
Menus” on page 27.
Follow the cable or satellite process below:
Turn on the cable box or satellite receiver that is connected to your LIFESTYLE system. Turn on the TV. Using the LIFESTYLE remote control, press CBL•SAT and follow these steps:
1.Identify the device:
•From the Remote Control options in the System menu, select CBL•SAT Device.
•Move right and select a device from the multiple options by pressing Enter.
2.Identify the brand:
•In the menu options on the left, select CBL•SAT Brand.
•Move to the right and up or down in the alphabetical list to locate your brand.
•Press Enter to select the brand.
CONTROLLING EXTERNAL SOURCES
23
