42
REFERENCE
REFERENCE
EnglishFrançais Español
Using the media center:
1. Lift the media center doo r an d press the All Off button.
2. Press and hold the Enter button. Your current house code will appear in the media cen-
ter display window in the form of four rectangles, which represent the positions of
switches 1 thr ough 4:
3. While holding the Enter button, press any button on the remote control.
The media center displays the new house code, which confirms its recognition of the
new code:
4. Release the Enter button. The system remains off.
5. If you have additional remote controls, change the switches to match those of the first
remote control by following steps 1-3 above. You do not need to repeat steps 4-5.
Note: To verify your system’s house code, press Enter while the system is off. The display
confirms the settings of switches 1-4.
Figure 19
Miniature switche s on the
Primary remote are set for
use in the Main room (A)

Protecting and caring for your system

Follow the guidelines below when cleaning the surfaces.
• Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia,
or abrasives.
• Do not use any sprays near the system.
Cleaning the media center
Use only a soft, dry cloth to clean the outside of the media center.
HOUSE CODE:
Switches 1 - 4 down = 0 0 0 0 (current house code)
NEW HOUSE CODE:
(Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0 (new house code)
123456789
123456789
Switches (1-4)
as set at the factory:
all switches down.
Switches 1-4 need to match those
switch settings in your main remote.
Set switches 5-9 for the room where
you will use the Bose® link remote.
Switch 5 determines which “audio
stream” (of two) you hear.
For more information on streams,
refer to “Setting up a second room
with sound” on page 43.
Switches 6-9 represent the room
where the remote will be used.
In the main room, the primary
remote is set as Room A with all
switches down.
Other switches
For a Bose® link remote
in another room