DLP Projjecttor—User’’s Manuall
TEST MAIL
Send a test mail to check if your settings are correct. Click to “Execute” to enable this feature. Test Mail Status Button: Click to display the test result.
Sample of a message sent from the projector:
Projector Name: X X X X
Lamp 1 or 2 Hours Used: xxxx [H]
The lamp is at the end of its usable life. Please replace the lamp.
Note:
If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient's Address is correctly set.
Unless any one of the [Sender's Address], [SMTP Server's Name] or [Recipient's Address
PJLINK
This option allows you to set a password when you use the PJLink feature.
On/Off: Enable or disable the password.
Password: Enter a password (up to 32 characters)
Note:
PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard protocol is established by Japan Business Machine and Information System Industries As- sociation (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
PROJECTOR INPUT | PJLINK INPUT | PARAMETER |
|
|
|
Computer 1 | RGB 1 | 11 |
|
|
|
Computer 2 | RGB 2 | 12 |
|
|
|
Video | VIDEO 1 | 21 |
|
|
|
VIDEO 2 | 22 | |
|
|
|
Component | VIDEO 3 | 23 |
|
|
|
Computer 3 | DIGITAL 1 | 31 |
|
|
|
– 104 –
