DLP Projjecttor – User’’s Manuall
Changing Lamp Mode
The projector has two lamp modes available, Normal and Eco. The Normal mode is used for every- day standard projection, whereas the Eco mode is used for saving power and lamp life. To change the Lamp Mode, refer to the following guides.
Changing Lamp Mode by Using the Projector's OSD Control Panel
1.
2.
Press Menu on the projec- tor's OSD control panel to display the Main menu.
Scroll to the Setting menu using Ÿorź and press 
.
Select the Basic tab using ŻorŹ and select Lamp control using Ÿorź. Press 
.
3. From the Lamp control window, select Normal or Eco using Ÿorź. Select OK and press 
.
Note:
When the projector is in Eco mode, brightness may be affected. Normal Mode: 100% Brightness
Eco Mode: approx. 85% Brightness
– 39 –
