DLP Projjecttor – User’’s Manuall
Turning off the Projector
Once the projector is no longer required, it is important to shut it down correctly to avoid damage or unnecessary wear and tear to the projector.
Note:
y Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so can cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable. To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker.
y Do not turn off the AC power supply within 10 seconds of making adjustment or setting changes and closing the menu. Doing so can cause loss of adjustments and settings and return to default.
Refer to the following guide to shut down the projector.
1. Press the POWER button once. The Power Off window displays.
2. Press the POWER button or 
again on the OSD control panel or remote control to verify power off. The cooling fans continue to operate
The cooling fans stop operating when the projector turns off.
3.
4.
The projector enters Standby mode when the power LED lights orange and the warning LED lights green.
Press the Main Power switch to the off position (O) to turn off the projec- tor.
– 35 –
