5.3.1Media Width Adjustment
This adjustment allows the use of narrower media, (less than 4 inches wide) in the Printer.
1.Rotate the Head Level Adjustment Knob clockwise to raise the minimum printhead to platen position for narrow media.
NOTE: Rotate the head level adjustment knob counterclockwise to lower the minimum printhead to position.
2.Install the media, (see Section 2.5).
3.Print a
Figure 5-2 Media Width Adjustment
4.If the print quality is unacceptable, repeat steps 1 and 3 until the print quality is acceptable.
_____________________________________________________________________________________________________
58 | Maintenance and Adjustments |
