This indicator is lit when no media edge and/or no ribbon motion is detected; a fault condition.
The PAUSE indicator will turn on if any of the following occurs:
•The PAUSE switch is pressed.
•A print job is canceled with the CANCEL switch.
This switch temporarily interrupts the printing process illuminating the Pause LED. A second press allows printing to resume and extinguishes the LED.
When pressed the paper will advance to the first print position of the next label. In addition this button is used to clear fault conditions indicated by the Ribbon Media LED.
Interrupts and deletes the active print job.
RIBBON ON/OFF | For direct thermal printing, (no ribbon), slide the |
SWITCH: | switch to the "off " position. For thermal transfer |
| printing, (ribbon installed), slide the switch to the |
| "on" position. This Switch is not present on the |
| LCD/Keypad Front Panel Option. |
DARKNESS POT: | This potentiometer is used to fine adjust print |
| darkness to variations in the media. This |
| potentiometer is not present on the LCD/Keypad |
| Front Panel Option. |
_______________________________________________________________________
26 | Using Your Printer |
