Briggs & Stratton Water Transfer Pump manual Stopping the Water Pump, Drain and Flush Water Pump

Stopping the Water Pump

1.Move engine speed lever to “Slow” ( ) position.

2.Push on/off switch to “Off” position.

3.Turn fuel valve to “Off” position.

WARNING

Backfire, fire or engine damage could occur.

•DO NOT stop engine by moving choke control to “Choke” () position.

Drain and Flush Water Pump

1.Disconnect and drain suction and discharge hoses.

2.Remove drain plug at bottom of pump.

3.Remove primer plug from top of pump and flush internal components of pump with clean water.

4. Replace both plugs and finger tighten.

14 BRIGGSandSTRATTON.COM