Briggs & Stratton Water Transfer Pump Prime the Water Pump, Remove priming plug from top of pump

	Total Head
Discharge Head	- 106 feet (32m)
- 81 feet (25m)	Maximum
Maximum
	Suction Head
	- 25 feet (8m)
	Maximum

Prime the Water Pump	Locate Strainer Basket Into Water Source
1. Remove priming plug from top of pump.	Place strainer basket into water to be pumped. Basket must

be fully immersed in water.

2. Fill pump with clean, clear water up to top of discharge outlet.

3. Replace priming plug.

NOTICE

Improper treatment of water pump can damage it and shorten its life.

•Be sure pump chamber is filled with water before starting the engine. NEVER run pump without priming.

NOTICE

Improper treatment of water pump can damage it and shorten its life.

•NEVER operate pump without strainer connected to end of suction hose.

•Keep strainer out of sand or silt, place in bucket or on stones.

•DO NOT let pump run dry or damage to seals may result.

12 BRIGGSandSTRATTON.COM