2.Length of Coverage

B&S warrants to the initial owner and each subsequent purchaser that the Warranted Parts shall be free from defects in materials and workmanship which caused the failure of the Warranted Parts for a period of two years from the date the engine is delivered to a retail purchaser.

3.No Charge

Repair or replacement of any Warranted Part will be performed at no charge to the owner, including diagnostic labor which leads to the determination that a Warranted Part is defective, if the diagnostic work is performed at an Authorized B&S Service Dealer. For emissions warranty service contact your nearest Authorized B&S Service Dealer as listed in the “Yellow Pages” under “Engines, Gasoline,” “Gasoline Engines,” “Lawn Mowers,” or similar category.

4.Claims and Coverage Exclusions

Warranty claims shall be filed in accordance with the provisions of the B&S Engine Warranty Policy. Warranty coverage shall be excluded for failures of Warranted Parts which are not original B&S parts or because of abuse, neglect or improper maintenance as set forth in the B&S Engine Warranty Policy. B&S is not liable to cover failures of Warranted Parts caused by the use of add-on, non-original, or modified parts.

5.Maintenance

Any Warranted Part which is not scheduled for replacement as required maintenance or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted as to defects for the warranty period. Any Warranted Part which is scheduled for replacement as required maintenance shall be warranted as to defects only for the period of time up to the first scheduled replacement for that part. Any replacement part that is equivalent in performance and durability may be used in the performance of any maintenance or repairs. The owner is responsible for the performance of all required maintenance, as defined in the B&S Operator’s Manual.

6.Consequential Coverage

Coverage hereunder shall extend to the failure of any engine components caused by the failure of any Warranted Part still under warranty.

Emission Information

Engines that are certified to meet the California Air Resources Board (CARB) Tier 2 Emission Standards must display information regarding the Emissions Durability Period and Air Index. The engine manufacturer makes this information available to the consumer on emission labels. The engine emission label will indicate certification information.

The Emissions Durability Period describes the number of hours of actual running time for which the engine is certified to be emissions compliant, assuming proper maintenance in accordance with the Operating & Maintenance Instructions. The following categories are used:

Moderate: Engine is certified to be emission compliant for 125 hours of actual engine running time.

Intermediate: Engine is certified to be emission compliant for 250 hours of actual engine running time.

Extended: Engine is certified to be emission compliant for 500 hours of actual engine running time.

For example, a typical walk-behind lawn mower is used 20 to 25 hours per year. Therefore, the Emissions Durability Period of an engine with an intermediate rating would equate to 10 to 12 years.

Certain engines will be certified to meet the United States Environmental Protection Agency (USEPA) Phase 2 emission standards. For phase 2 certified engines, the Emissions Compliance Period referred to on the Emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements.

For engines less than 225 cc displacement: Category C = 125 hours

Category B = 250 hours Category A = 500 hours.

For engines of 225 cc or more displacement: Category C = 250 hours

Category B = 500 hours

Category A = 1000 hours.

22

BRIGGSandSTRATTON.COM

Page 21 Page 23
Page 22
Image 22
Briggs & Stratton Water Transfer Pump manual Emission Information, Claims and Coverage Exclusions, Maintenance
Page 21 Page 23

Water Transfer Pump specifications

The Briggs & Stratton Water Transfer Pump is an essential tool designed for a variety of water transfer applications, combining efficiency with reliability. This powerhouse is ideal for homeowners, landscapers, and contractors who need to move large volumes of water for tasks like draining pools, emptying flooded basements, or irrigating gardens.

One of the standout features of the Briggs & Stratton Water Transfer Pump is its robust engine. The pump typically utilizes a dependable, four-stroke gas engine that provides superior power and fuel efficiency. With a reliable starting system, users can count on it to start quickly and run smoothly, even during extended use. This ensures that no time is wasted when water needs to be moved promptly.

In terms of performance, the water transfer pump is designed to handle significant volumes of water, often capable of transferring up to 3,000 gallons per hour. This impressive flow rate makes it suitable for both small-scale residential needs and larger commercial projects. The pump's lightweight and portable design allows users to easily transport it to various job sites, enhancing its versatility.

The pump's design incorporates a durable, corrosion-resistant construction, ensuring longevity even when exposed to harsh conditions. This resilience is critical for maintaining performance over time, particularly when dealing with muddy or sediment-filled water. Additionally, many models feature a convenient carrying handle, making it even easier to transport from one location to another.

Another significant aspect of the Briggs & Stratton Water Transfer Pump is its user-friendly interface. With intuitive controls, operators can quickly adjust settings and monitor performance without extensive technical knowledge. This focus on ease of use, combined with comprehensive safety features, helps ensure a safe and efficient operation every time.

Moreover, the pump often comes equipped with a variety of hose fittings and attachments, allowing users to customize it for specific tasks. The efficient pump mechanism, combined with these features, makes it an impressive option for all water transfer needs.

In summary, the Briggs & Stratton Water Transfer Pump stands out due to its powerful engine, impressive water-moving capacity, durable construction, portability, and user-friendly design. It's an indispensable tool for anyone needing to move water efficiently and effectively. Whether for landscaping, construction, or managing water in residential settings, this pump provides reliability you can trust.
Top Page Image Contents