Table 2. Switch-module LED descriptions (continued).
LED name | LED color and state | Hardware status |
|
|
|
Port speed | Green: Off | The indicated Fibre Channel |
|
| 15) is operating at 1 Gbps. |
|
|
|
| Green: On | The indicated Fibre Channel |
|
| 15) is operating at 2 Gbps. |
|
|
|
Port status | Green: Off | No signal or the port diagnostics LED is active on the |
|
| indicated port (0 or 15). |
|
|
|
| Green: Steady | The indicated port (0 or 15) is online. |
|
|
|
| Green: Flickering | The indicated port (0 or 15) is connected and Fibre |
|
| Channel activity is occurring on that port. |
|
|
|
| Green: Flashing slowly | The indicated port (0 or 15) is online but segmented |
|
| from the connected switch or device. |
|
|
|
| Green: Flashing rapidly | The indicated port (0 or 15) is in the internal loopback |
|
| mode because of diagnostics. |
|
|
|
Port diagnostics | Amber: Off | No faults on the indicated port (0 or 15). |
|
|
|
| Amber: Steady | The indicated port (0 or 15) signal is present but not |
|
| online. |
|
|
|
| Amber: Flashing slowly | The indicated port (0 or 15) has been disabled, or |
|
| switch beaconing is on. |
|
|
|
| Amber: Flashing rapidly | This LED is lit on the indicated port (0 or 15) when the |
|
| |
|
| (port fault). |
|
|
|
✏ NOTE
For LED locations, see Figure 9 on page 23.
24 | Brocade SAN Switch Module: Installation Guide |
