Brocade Communications Systems SBCEBFCSW manual Enter Network Password window

Establishing a Telnet session through the management module

Complete the following steps to establish a Telnet session through the Blade management module:

1.In your browser, in the address bar, type http://xxx.xxx.xxx.xxx, where xxx.xxx.xxx.xxx is the IP address of the SBCE management-module interface. Click GO or press Enter. The Enter Network Password window opens.

✏NOTE

The default IP address for the SBCE management module is 192.168.70.125.

Figure 10. Enter Network Password window.

2.In the User Name field, type the initial default user name, USERID. In the Password field, type the initial default password, PASSW0RD (the sixth character is a zero, not the letter O). The user name and password are case sensitive.

The Active Session from Same Client window opens.

Figure 11. Active Session from Same Client window. 3.In the Inactive session timeout value field, select the timeout value for this Web session and click Start New Session. The SBCE management-module main window opens.

26 Brocade SAN Switch Module: Installation Guide