Option

Installing extra memory

Note

Always turn off the machine power switch before installing or removing the SO-DIMM.

a Turn off the machine power switch, and then unplug the machine. Disconnect all interface cables from the machine.

b Remove the plastic (1) and then the metal (2) SO-DIMM covers.

4

2

1

c Unpack the SO-DIMM and hold it by its edges.

IMPORTANT

To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface.

d Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).

12

87