Printing Methods

Manual duplex printing

The BR-Script printer driver for Windows® does not support manual duplex printing.

1

If you are using the Macintosh Printer Driver, see Manual Duplex Printing on page 58.

Manual duplex printing with the Windows® printer driver

a Choose the following settings from each drop-down list of the printer driver.

Paper Size

You can use all the paper sizes specified for the tray you are using.

Media Type

You can use all the media types that are specified for the tray you are using, except envelopes and labels which have only one print side.

Paper Source

Tray 1

MP Tray

Tray 2 (if available)

Duplex / Booklet

Duplex (Manual)

Duplex Type in Duplex Settings...

There are four options for each orientation. (See Duplex / Booklet on page 33.)

Binding Offset in Duplex Settings

You can specify the offset for binding. (See Duplex / Booklet on page 33.)

Note

When you are using glossy paper, put only one sheet at a time in the MP tray to avoid a paper jam.

For any other settings, see Driver and Software in Chapter 2.

b Send the print data to the machine. The machine will print all the even-numbered pages on one side of the paper first. Then, the Windows® driver instructs you (with a pop-up message) to reinsert the paper to print the odd-numbered pages.

Note

Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or thick paper is not recommended.

22