Chapter 2

d Put paper in the tray and make sure:

The paper is below the maximum paper mark (b b b) (1).

Over filling the paper tray will cause paper jams.

The side to be printed on must be face down.

The paper guides touch the sides of the paper so it will feed properly.

1

e Put the paper tray firmly back in the machine. Make sure that it is completely inserted into the machine.

f Lift up the support flap (1) to prevent paper from sliding off the face-down output tray or remove each page as soon as it comes out of the machine.

1

12

Loading paper in the multi- purpose tray (MP tray)

You can load up to 3 envelopes or special print media in the MP tray or up to 50 sheets of plain paper. Use this tray to print or copy on thick paper, bond paper, labels or envelopes. (For recommended paper to use, see Paper capacity of the paper trays on page 21.)

Printing on plain paper, bond paper, labels or glossy paper from the MP tray

a Open the MP tray and lower it gently.