Drum Stop
Drum Stop
We cannot guarantee the print quality. Please replace the drum unit with a new one. We recommend a Brother Original drum unit be installed at this time.
After replacement, reset the drum counter by following the instructions included with the new drum unit.
Replacing the drum unit
IMPORTANT
•While removing the drum unit, handle it carefully because it may contain toner. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once.
•Every time you replace the drum unit, clean the inside of the machine. (See Cleaning and Checking the machine on page 60.)
a Make sure that the machine is turned on.
b Press the front cover release button and then open the front cover.
42