Chapter 2

e Open the back cover (Face-up output tray).

f Pull down the two grey levers, one on the left-hand side and one on the right- hand side, to the envelope position as shown in the illustration below.

g Close the back cover.

h Send the print data to the machine.

i When you have finished printing, open the back cover and reset the two grey levers which are pulled down at step f back to the original position.

Note

•Remove each printed envelope immediately to prevent a paper jam.

•If your thick paper curls during printing, put only one sheet at a time in the MP tray and open the back cover (back output tray) to let the printed pages exit to the back output tray.

•To easily remove a small printout from the output tray, lift up the scanner by using both hands as shown in the illustration.

•You can still use the machine while the scanner is up. To close the scanner, push it down with both hands.

16