Configuring your machine for a wireless network

Wireless configuration temporarily using a USB cable

It is recommended that you use a computer wirelessly connected to your network for this method. You can remotely configure the machine from a computer on the network using a USB cable (A) 1.

3

1You can configure the wireless settings of the machine using a USB cable temporarily connected to a wired or wireless computer.

IMPORTANT

•You need to temporarily use a USB cable during configuration (cable not included).

•If you are using Windows® XP, or currently using a computer connected to an access point/router by network cable, you need to know the SSID and Network Key of your access point/router. Write them down in the area below, as they are required when configuring the machine’s wireless settings.

Item

Record the current wireless network settings

SSID (Network Name):

Network Key

a b

Turn on your computer.

Start the Brother installer application.

Windows®

1Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically. If the language screen appears, choose your language.

2The CD-ROM main menu will appear. Click Custom Installation.

NOTE

•If the Brother screen does not appear automatically, go to Computer (My Computer), double-click the CD-ROM icon, and then double-click start.exe.

•The screen on your machine may vary depending on your region.

3Click Wireless LAN Setup Wizard.

12