Press Settings.
Press s or t to display Network and then press Network. Press WLAN.
Press Setup Wizard.

Configuring your machine for a wireless network

(For DCP-J4110DW, MFC-J2310/J4310DW/J4410DW/J4610DW)

a Before configuring your machine we recommend you write down your wireless network settings. You will need this information before you continue with the configuration.

Check and record the current wireless network settings.

SSID (Network Name):

 

 

 

3

 

 

 

 

 

 

 

 

 

 

Communication Mode

Authentication method

Encryption mode

Network key

 

Infrastructure

Open system

WEP

 

 

 

 

 

 

 

 

 

NONE

—

 

 

 

 

 

 

 

Shared key

WEP

 

 

 

 

 

 

 

 

WPA/WPA2-PSK

AES

 

 

 

 

 

 

 

 

 

TKIP 1

 

 

1TKIP is supported for WPA-PSK only.

For example:

SSID (Network Name):

HELLO

Communication Mode

Authentication method

Encryption mode

Network key

Infrastructure

WPA2-PSK

AES

12345678

 

 

 

 

NOTE

If your access point/router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only.

b c d e

f When Network I/F switched to Wireless is displayed, press Yes to accept. This will start the wireless setup wizard.

To cancel, press No.

g The machine will search for your network and display a list of available SSIDs. Press s or t to display <New SSID>, and press <New SSID>.

h Enter the SSID name. (For information on how to enter text, see the Quick Setup Guide.) Press OK.

25