The machine starts to connect to the wireless device you have chosen.
Choose and press the Encryption type, TKIP or AES. Go to step n.
Press Infrastructure when instructed.

Configuring your machine for a wireless network

i

j Choose and press the Authentication method. Do one of the following:

If you choose Open System, go to step k. If you choose Shared Key, go to step l.

If you choose WPA/WPA2-PSK, go to step m.

3

k Choose and press the Encryption type None or WEP. Do one of the following:

If you choose None, go to step o. If you choose WEP, go to step l.

l Enter the WEP key you wrote down in step a on page 25. Press OK. Go to step o. (For information on how to enter text, see the Quick Setup Guide.)

m

n Enter the WPA key you wrote down in step a on page 25 and press OK. Go to step o. (For information on how to enter text, see the Quick Setup Guide.)

o To apply the settings, press Yes. To cancel, press No. Do one of the following:

If you choose Yes, go to step p.

If you choose No, go back to step g.

p

q A connection result message appears for 60 seconds on the LCD and a wireless LAN report will

automatically be printed. If the connection failed, check the error code on the printed report. See Quick Setup Guide: Troubleshooting

(Windows®)

You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from the CD-ROM menu.

(Macintosh)

You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please double-click Start Here OSX in the CD-ROM.

26