Insert the document face down in the ADF.
Pick up the handset of the external telephone and listen for a dial tone.
Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, press Redial/Pause and Fax Start to try again. Anytime you want to make a second call to the last number dialled, press Redial/Pause and Fax Start to save time.

If you’re sending a fax automatically and the line is busy, the machine will automatically redial up to 4 times at 2 minute intervals.

Pause

Press Redial/Pause to insert a pause between digits to be dialled.

If the machine is connected to a PABX, you may need to insert an additional number prefix (e.g. “9”) and a “pause” before each fax or telephone number to gain access to the outside line. When you press Redial/Pause, a dash “-” will appear on the display. By storing a pause, you can create a delay of 3.5 seconds.

Sending Operation

Automatic Transmission

This is the easiest way to send a fax.

IMPORTANT: Do not pick up the external telephone’s handset.

1 Insert the document face down in the ADF.

2 Enter the fax number using One Touch (FAX-8070P), Speed Dial, Search or the dial pad.

3 Press Fax Start.

Manual Transmission (With an External Telephone)

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending a fax.

1

2

3 Enter the fax number you want to call. (You can dial the number by using One Touch, Speed Dial, Search or dial pad.) (See Dialling a Number, page 23.)

4 When you hear the fax tone, press Fax Start.

5 Return the handset of the external telephone to its cradle.

USE FAX BASIC

Sending a Fax 25