Changing the Remote Access Code

Enter your Remote Access Code when the machine picks up your call, so you can access features remotely. The access code is preset to 1 5 9 , but you can change this.

1 Press Menu/Set, 2, 5, 3.

2 Enter a three-digit number from 000 to 998, and press Menu/Set.

The cannot be changed. Do not use the same digits that appear in your Remote Activation or Deactivation Code.

3 Press Stop/Exit.

Remote Retrieval

Using Your Remote Access Code

To receive faxes at your location, you must call from a fax machine using touch tone. For convenience, you can retrieve faxes from a touch tone phone by having them sent to a fax machine. For example, if your hotel room does not have a fax machine, you can enter the number of the fax machine at the hotel’s Front Desk.

1 Dial your fax number from a touch tone phone.

2 When the machine answers and beeps, immediately enter your Remote Access Code (the factory setting is 1 5 9 ).

3 The machine signals the kinds of messages received:

1 long beep — Fax message(s) No beep — No messages

4 The machine prompts you with two short beeps to enter a command. If you wait longer than 30 seconds to enter a command, the machine hangs up. If you enter an invalid command, the machine beeps three times.

5 Press 9 0 to reset the machine when you finish. 6 Hang up.

USE FAX ADVANCED

Remote Fax Options 51