Canceling a Broadcast in progress

While broadcasting you can cancel the fax currently being sent or the whole broadcast job.

a Press Menu, 2, 7.

The LCD will display the Broadcast job number followed by the fax number being dialed (for example, #001 123456789) and the broadcast job number (for example, Broadcast#001).

Fax

7.Remaining Jobs

b Press a or b to choose one of the following:

Choose the fax number being dialed, and press OK.

Choose the broadcast job number, and press OK.

c Press 1 to cancel the fax number or Broadcast job number you chose in step b, or press 2 to exit without canceling.

If you chose to only cancel the fax currently being sent in step b, the LCD will ask you if you want to cancel the broadcast job. Press 1 to clear the whole broadcast job or 2 to exit.

d Press Stop/Exit.

Sending a fax

Real Time Transmission

When you are sending a fax, the machine will scan the documents into the memory before sending it. Then, as soon as the telephone line is free, the machine will start dialing and sending.

Sometimes, you may want to send an

3

important document immediately, without

 

waiting for memory transmission. You can set

 

Real

Time TX to On for all documents or

 

Next

Fax:On for the next fax only.

 

Note

•If the memory is full and you are sending a fax from the ADF, the machine will send the document in real time (even if

Real Time TX is set to Off). If the memory is full, faxes from the scanner glass cannot be sent until you clear some of the memory.

•In Real Time Transmission, the automatic redial feature does not work when using the scanner glass.

Sending in real time for all faxes

a Make sure you are in Fax mode . b Press Menu, 2, 2, 5.

Setup Send 5.Real Time TX

c Press a or b to choose On. Press OK.

Sending in real time for the next fax only

a Make sure you are in Fax mode . b Press Menu, 2, 2, 5.

Setup Send 5.Real Time TX

c Press a or b to choose Next Fax:On. Press OK.

17