7 Making copies
Copy settings
When you want to quickly change the copy settings temporarily for the next copy, use the temporary COPY keys. You can use different combinations.
The machine returns to its default settings one minute after copying, unless you have set the Mode Timer to 30 seconds or less. (See Mode Timer on page 6.)
To change a setting, press the temporary COPY keys. You can use Options,
Enlarge/Reduce or Duplex 1.When you are finished choosing settings, press Start.
1For
Stop copying
To stop copying, press Stop/Exit.
42
Enlarging or reducing the image copied
You can choose the following enlargement or reduction ratios:
Press100%*
97% LTRiA4
94% A4iLTR
91% Full Page
85% LTRiEXE
83% LGLiA4
78% LGLiLTR
70% A4iA5
50%
Auto
200%
141% A5iA4
104% EXEiLTR
*The factory setting is shown in Bold with an asterisk.
Auto sets the machine to calculate the reduction ratio that best fits the size of paper.
Auto is only available when using the ADF.
To enlarge or reduce the next copy follow the instructions below:
a Make sure you are in Copy mode 
. b Load your document.
c Use the dial pad to enter the number of copies (up to 99).
d Press Enlarge/Reduce.