d Replace the external handset.
Setting the Print Density
You can adjust the Print Density setting to make your printed pages darker or lighter.
a Make sure you are in Fax mode 
. b Press Menu, 2, 1, 6.
Setup Receive 6.Print Density
c Press c to make the print darker. Or, press d to make the print lighter. Press OK.
d Press Stop/Exit.
Printing a fax from the memory
If you are using the Fax Storage feature
(Menu, 2, 5, 1), you can still print a fax from the memory when you are at your machine. (See Fax Storage on page 23.)
a Press Menu, 2, 5, 3.
Remote Fax Opt 3.Print Fax
b Press Start.
c Press Stop/Exit.
Receiving a fax
Receiving faxes into memory when the paper tray is empty
As soon as the paper tray becomes empty during fax reception, the LCD shows No Paper and begins receiving faxes into the machine’s memory. Put some paper in the paper tray. (See Loading paper and print media in Chapter 2 of the Basic User's Guide.)
The machine will carry on receiving the fax, | 4 |
with the remaining pages being stored in memory, if enough memory is available.
Incoming faxes will continue to be stored in the memory until the memory becomes full or paper is loaded in the paper tray. When the memory is full the machine will stop automatically answering calls. To print the faxes, put fresh paper in the tray and press Start.
29