Brother DCP, MFC Network Scanning (For models with built-in network support)

138
11
11
If you want to scan from the machine on a network, you must choose the networked machine in the
DeviceSelector application located in Macintosh HD/Library/Printers/Brother/Utilities or from the Model
pop-up menu in the main screen of ControlCenter2. If you already installed the MFL-Pro Suite Software
following the network installation steps in the Quick Setup Guide then this selection should already be made.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings f rom t he control panel. (See Control Panel Setup in the Network User’s
Guide.)
Note
For network scanning, maximum 25 clients can be connected to one machin e on a network. For example,
if 30 clients try to connect at a time, 5 clie nt s wi ll not be shown on the LCD.
Before using Network Scanning 11
Configuring network scanning 11
aFrom Library, choose Printers, Brother, Utilities and DeviceSelector, and then double-click
DeviceSelector.
The DeviceSelector window appears. This window can also be opened from ControlCent er 2.
For more information, se e Using Control Ce nter 2on page 122.
Network Scanning
(For models with built-in network
support) 11