CHAPTER 14 BROTHER NETWORK PC FAX SOFTWARE

When the process is finished a dialogue box is displayed showing which FAX/MFC’s on the network have been updated.

Sending a Fax from Your Macintosh® Application

You can send a fax directly from your Macintosh® application using the following steps:

1.From the Apple menu, open the Chooser.

2.Click HL-1200/MFL Pro icon. On the right side of the Chooser, click the printer to which you want to print. Close the Chooser.

3.To begin the fax transmission, select Print from the File menu.

The Printer dialog box appears:

When Printer is selected, the top button shows Print and the Address

button is grayed.

To connect with AppleTalk®, it is necessary to show printer’s AppleTalk® service name in the Connect to list box. The default node name will be BRN_XXXXXX_P1, where “XXXXXX” is the last six digits of the Ethernet address (MAC address).

You can find the node name and MAC address by printing out the FAX/MFC configuration page. Refer to the NC-8100h Quick Setup Guide for information on how to print the configuration page on your Print/Fax server.

4.From the Output pop-up menu, select Facsimile.

When Facsimile is selected, the top button shows Send Fax and the Address button is available.

5.Click Send Fax.

The Send Fax dialog box appears:

The Send Fax dialog box has two list boxes. The left box shows all the previously Stored Fax Numbers; the right box will show the Destination Fax Numbers as you select them.

6.To address the fax, type a fax number in the Input Fax Number box.

—OR—

Select a name/number from the Stored Fax Numbers box, and then click >>. Your recipient will appear in the Destination Fax Numbers box.

Note: You can select several stored numbers at once by using the Shift and Ctrl keys.

14-13