CHAPTER 2 FRONT PANEL SETUP MENU

5-HOST NAME

1.Press the [Menu] button to display the configuration menu.

2.Select LAN

3.Press [1] [5].

4.Select [1] to change the Host Name—OR—[2] to exit.

5.Enter the Host Name.

6.Press [Set] to accept the selection.

7.Press [Stop/Exit] to exit the configuration menu.

HOST NAME

You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRN-XXXXXX (where XXXXXX is the last six digits of the Ethernet address) (up to 15 characters).

6-WINS Configuration

1.Press the [Menu] button to display the configuration menu.

2.Select LAN

3.Press [1] [6].

4.Press ! or " to select AUTO or STATIC.

5.Press [Set] to accept the selection.

6.Press [Stop/Exit] to exit the configuration menu.

WINS Configuration

This selection controls how the FAX/MFC obtains the IP address for the WINS Server.

AUTO

Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS servers. You must set the Boot Method to Auto for this feature to work.

STATIC

Uses a specified IP address for the primary and secondary WINS servers.

7-WINS SERVER

1.Press the [Menu] button to display the configuration menu.

2.Select LAN.

3.Press [1] [7].

4.Press ! or " to select the Primary or secondary WINS Server.

5.Press [Set] to accept the selection.

6.Enter the WINS Server address.

7.Press [Set] to accept the selection.

8.Press [Stop/Exit] to exit the configuration menu.

2-5