CHAPTER 2 FRONT PANEL SETUP MENU

CHAPTER TWO

Front2Panel Setup Menu

LAN Main Setup Menu

The LAN menu selections allow you to setup the Brother FAX/MFC for your network and Internet Fax configuration. Press [Menu] then press the appropriate number for LAN, based on the selections displayed on your machine. After you have displayed the LAN Main Setup menu, there are six main selections: 1-

Setup TCP/IP, 2-Setup Internet, 3-Setup Mail RX, 4-Setup Mail TX, 5-Setup Relay and 6-Setup MISC. Proceed to the menu selection you wish to configure.

Please note that once you have specified a valid IP address for the machine, it is also possible to configure many aspects of the FAX/MFC using your favorite web browser. For added flexibility, the FAX/MFC is supplied with the BRAdmin Professional Windows® software, which also can be used to configure many aspects of the NC-8100h.

1-Setup TCP/IP

This menu has eight sections: 1-Boot Method, 2-IP Address, 3-Subnet Mask, 4- Gateway, 5-Host Name, 6-WINS Config, 7-WINS Server and 8-DNS Server.

1-BOOT METHOD

1.Press the [Menu] button to display the configuration menu.

2.Select LAN.

3.Press [1] [1].

4.Press ! or " to select AUTO, STATIC, RARP, BOOTP or DHCP.

5.Press [Set] to accept the selection.

6.Press [Stop/Exit] to exit the configuration menu.

7.Now make sure that you power cycle the FAX/MFC.

2-1