CHAPTER 1 TCP/IP CONFIGURATION
Using BRAdmin and the IPX/SPX Protocol to set the IP address
If your PC has Novell Netware Client software and is using the IPX/SPX protocol, do the following:
1.Select IPX/SPX filter in the left frame of the main window.
2.Check the Print / Fax server name (the default node name will be BRN_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet address (MAC address)).
If you cannot find your server name, select the "Device" menu and choose "Search Active Devices" (you can also press the F4 key) and try again.
You can find the node name and MAC address by printing out the FAX/MFC configuration page. Refer to the
3.Select the Print / Fax server that you wish to configure and double click it. You will be asked for a password. The default password is "access".
4.Select the TCP/IP tab and set the IP address, Subnet mask and Gateway as needed.
5.Click OK.