CHAPTER 9 NOVELL NETWARE PRINTING
18.Execute the BRCONFIG from the Windows® menu or insert the CD- ROM that came with your FAX/MFC into the
Select the Print / Fax server from the list of Print / Fax servers. When you get the message that the Print / Fax server is connected, press the ENTER key and type the default password of "access" in response to the "#" prompt (the password will not echo), and then press the ENTER key again in response to the ENTER Username> prompt. When you get the Local> prompt, type:
SET SERVICE service TREE tree
SET SERVICE service CONTEXT Context
•Where tree is the NDS tree name.
•Where context is the name of context where the Print / Fax server resides.
•Service is the name of the service assigned by NetWare Print / Fax server name (where the default services are BRN_xxxxxx_P1 for the Brother printer, where "xxxxxx" is the last six digits of the Ethernet address (MAC address).
•You can also enter the TREE and CONTEXT name using your web browser by connecting to the Brother Print / Fax server using the TCP/IP protocol and selecting the NetWare protocol configuration.
19.Use the BRCONFIG command or TELNET command: SET NETWARE RESCAN to force the Print / Fax server to rescan for file servers, or power cycle the printer.
The same services assigned by NetWare Print / Fax server names cannot be used for both queue server mode and remote printer mode.
The same service assigned by NetWare Print / Fax server cannot be used for both queue server mode and remote printer mode. If you want to enable remote printer capabilities on a service other than the default NetWare service, you must define new services that are enabled for NetWare and for the desired port. Refer to Appendix B in this manual for information on how to do this.