CHAPTER 8 BIP INTERNET PRINTING INSTALLATION

Brother Internet Print

Configuring the Brother Print / Fax server

The Print / Fax server can be configured using BRAdmin, by using a web browser, or by using the TELNET command.

Print / Fax server Configuration Checklist

Before configuring the Print / Fax server to receive BIP jobs, be sure that the E- mail server at the remote site (the receiving end) is configured to handle the TCP/IP POP3, and SMTP protocols (SMTP is only required if the notification feature is enabled).

1.Configure the POP3 server on the E-mail server at the remote site with a mail account (Mailbox name) and password for the Brother Print / Fax server (generally, the mail account name will be the first part of the Email address; for example, if you assign the Email address emailprinter@xyz.com, then the mail account name would be emailprinter).

2.Make sure that the Print / Fax server is installed and running with TCP/IP enabled and has a valid IP address assigned to it.

Because access to the E-mail server on most networks is usually restricted, you may need to have your network administrator check the configuration and add the mail account.

8-3